Jump to content


Photo

Matson Hill Fall Workday v11-10-18


  • Please log in to reply
No replies to this topic

#1 G-Tracker

G-Tracker

    Advanced Contributor

  • Forum Member
  • PipPipPip
  • 211 posts

Posted 31 October 2018 - 03:39 AM

 
What: The Fall 2018 Matson Hill Trail Build Day
 
Where: The Matson Hill Park main trail head
 
(The most straightforward way) from the Highway 40/94 interchange: Take Highway 94 South approximately 13 miles. Go past Defiance to Matson, turn right and follow Matson Hill Rd to the top of the hill. Turn right onto Matson Road (now paved) and go ~ .5 mile to the trailhead, which will be on your left. Click Here for Park location.
 
If the lot would fill up, parking is available at the Katy Trail Matson Depot at the junction of Hwy 94 and Matson Hill Road.  You can carpool up from there.
 
When: Saturday, November 10, 2018  from 9:00~1:00.
 
Why: We will put in one new reroute on the Matson Hill Loop and also perform much needed maintenance on Oxen Mill through the old cedar trail. Wear good supportive shoes and bring your water. There will be a bit of a hike to get to the work areas.
 
Got Q's?: Please read the link to pilznr's "What to expect at a Trail Build Day" - http://forum.gorctra...l-building-day/.  Or, post up here, and we'll do our best to answer things for ya.
 
Weather: the decision to cancel will be made by SCCP's and posted on the Trail Hotline (636-707-0011, click the programs prompt), so if there is any doubt, please check there before heading out.  We will do our best to update the forum/Twitter, but that will rely upon available cell coverage.  
 
Please RSVP via; 
 
or
 
You can also call the St. Charles County Parks Office, @ 636-949-7535
 
GORC/SCCP's will provide on site instruction, tools, gloves, safety glasses, and a post event lunch*.
 
*Please contact us if you have any specific food requirements (veggie or food allergy), and we'll do our best to assist you.

Gary
Matson Hill Trail Steward

 

Who climbs up - gets to come down!





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users